1.3.6.1.4.1.11010 - UURMI TCS2 MIB
Submitted by rpk0507 at gmail.com from host (175.101.63.67)
on Mon Jul 9 11:22:29 CEST 2012
using a WWW entry form.
OID value: 1.3.6.1.4.1.11010
OID description:
i am developng snmp manger gui.this mib given to our client company.i hope this mib have no.of mistecks so check and verify it.mib can copy on bellow
UURMI-TCS2-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, Integer32, Counter32, Counter64,
Unsigned32, IpAddress, mib-2, enterprises FROM SNMPv2-SMI
MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF
TimeTicks FROM RFC1155-SMI
DisplayString, TestAndIncr, TimeStamp FROM SNMPv2-TC
TEXTUAL-CONVENTION,
RowStatus,
InetAddress, InetAddressType,
InetPortNumber FROM INET-ADDRESS-MIB;
-- the path to the root
uurmi OBJECT IDENTIFIER ::= { enterprises 11010 }
-- Path of uurmi from root is : iso.org.dod.internet.private.enterprises.uurmi
-- OID upto uurmi is : 1.3.6.1.4.1.11010
uurmiTCSMIB MODULE-IDENTITY
LAST-UPDATED "200505200000Z" -- Mar 6, 2012
ORGANIZATION
"IETF IPv6 Working Group
http://www.ietf.org/html.charters/ipv6-charter.html"
CONTACT-INFO
"Uurmi Systems
8-2-268/28/N,
Road No. 2, Banjara Hills,
Hyderabad-500034, A.P., India.
Phone: +91 (40) 2354 2715
Email:
Send comments to "
DESCRIPTION
"The MIB module for managing TCS implementations."
::= { uurmi 150 }
-- Configuration Information
uurmiTcsInstallation OBJECT IDENTIFIER ::= { uurmi 1 }
uurmiTcsAdministration OBJECT IDENTIFIER ::= { uurmi 2 }
uurmiTcsDiagnostics OBJECT IDENTIFIER ::= { uurmi 3 }
uurmiSourceInformation OBJECT IDENTIFIER ::= { uurmi 4 }
uurmiNotifs OBJECT IDENTIFIER ::= { uurmi 5 }
-- Variables under uurmiTcsInstallation
terminalType OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Terminsal Type - Master/Slave."
::= { uurmiTcsInstallation 1}
-- TerminalType 1.3.6.1.4.1.11010.1.1
terminalId OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Terminal Identifier (0-7)."
::= { uurmiTcsInstallation 2}
-- TerminalId 1.3.6.1.4.1.11010.1.2
linkId OBJECT-TYPE
SYNTAX Integer32 (0..32)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Link Identifier (0-32)."
::= { uurmiTcsInstallation 3}
-- LinkId 1.3.6.1.4.1.11010.1.3
repeater OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Repeater mode enabled/disabled."
::= { uurmiTcsInstallation 4}
-- Repeter 1.3.6.1.4.1.11010.1.4
antennaAlignment OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Antenna Alignment."
::= { uurmiTcsInstallation 5}
-- AntennaAlignment 1.3.6.1.4.1.11010.1.5
antennaPosType OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Antenna Position Type (Azimuth/Tilt) 0: Azimith 1: Tilt."
::= { antennaAlignment 1}
-- AntennaPosType 1.3.6.1.4.1.11010.1.5.1
antennaAdjustmentType OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" AntennaAdjustment Type 0: Coarse 1: Fine."
::= { antennaAlignment 2}
-- AntennaAdjustmentType 1.3.6.1.4.1.11010.1.5.2
antennaAdjustmentDir OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" AntennaAdjustment Direction 0: Clkwise 1: Anticlkwise."
::= { antennaAlignment 3}
-- AntennaAdjustmentDir 1.3.6.1.4.1.11010.1.5.3
antennaadjValue OBJECT-TYPE
SYNTAX Integer32 (0..180)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" AntennaAdjustment Value."
::= { antennaAlignment 4}
-- AntennaAdjval 1.3.6.1.4.1.11010.1.5.4
rpmvalue OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" RPM Value"
::= { antennaAlignment 5}
-- AntennaAdjustmentDir 1.3.6.1.4.1.11010.1.5.5
saveAsHomePosition OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Save as Home position"
::= { antennaAlignment 6}
-- Save As Home Position 1.3.6.1.4.1.11010.1.5.6
gotoHomePosition OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Goto Home Position"
::= { antennaAlignment 7}
-- GotoHomePosition 1.3.6.1.4.1.11010.1.5.7
dataRate OBJECT-TYPE
SYNTAX Integer32 (0..2)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Data Rate 0: 2MBPS 1: 8MBPS 2: 34 MBPS."
::= { uurmiTcsInstallation 6}
-- DataRate 1.3.6.1.4.1.11010.1.6
modulations OBJECT-TYPE
SYNTAX Integer32 (0..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Modulations."
::= { uurmiTcsInstallation 7}
-- DataRate 1.3.6.1.4.1.11010.1.7
basebandInterface OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Base Band Interface."
::= { uurmiTcsInstallation 8}
-- BaseBandInterface 1.3.6.1.4.1.11010.1.8
e1Trunk OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" E1Trunk Configuration: 0: Disable 1: Enable"
::= { basebandInterface 1}
-- E1Trunk 1.3.6.1.4.1.11010.1.8.1
e1TrunkPortsTable OBJECT-TYPE
SYNTAX SEQUENCE OF E1TrunkPortsEntry
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"E1 Trunk Ports table "
::= { e1Trunk 1 }
e1TrunkPortsEntry OBJECT-TYPE
SYNTAX E1TrunkPortsEntry
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Table Entry"
INDEX { port, indexe1 }
::= { e1TrunkPortsTable 1 }
E1TrunkPortsEntry ::= SEQUENCE {
port Integer32,
index Integer32,
e1TableRowStatus RowStatus
}
port OBJECT-TYPE
SYNTAX Integer32 (0..2)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"E1 Port 0:Disable 1:75ohms 2:120ohms"
::= { e1TrunkPortsEntry 1 }
indexe1 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"E1 Index."
::= { e1TrunkPortsEntry 2 }
e1TableRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is the string storeing e1TableEntries"
::={ e1TrunkPortsEntry 3}
e3Trunk OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" E3Trunk Configuration O: Disable 1: Enable"
::= { basebandInterface 2}
-- E3Trunk 1.3.6.1.4.1.11010.1.8.2
wanTrunk OBJECT-TYPE
SYNTAX Integer32 (0..4)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" WAN Configuration 0: Disable 1: 2MBPS 2: 4MBPS 3: 8MBPS 4: 16MBPS "
::= { basebandInterface 3}
-- WANTrunk 1.3.6.1.4.1.11010.1.8.3
etherNetTrunk OBJECT-TYPE
SYNTAX Integer32 (0..16)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Ethernet Configuration 0: Disable 1-16: Enable trunk lines"
::= { basebandInterface 4}
-- EtherNetTrunk 1.3.6.1.4.1.11010.1.8.4
configuration OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Configuration Upgradation 0: SaveConfig 1: LoadConfig"
::= { uurmiTcsInstallation 9}
-- Configuration 1.3.6.1.4.1.11010.1.9
-- Variables under uurmiTcsAdministration
frequencyMode OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Frequency Mode"
::= { uurmiTcsAdministration 1}
-- FrequencyMode 1.3.6.1.4.1.11010.2.1
fixedFrequency OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Fixed Frequency 0: Disable 1: Enable"
::= { frequencyMode 1}
-- FixedFrequency 1.3.6.1.4.1.11010.2.1.1
ffchnlnumber OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" FF chnl number"
::= { frequencyMode 2}
-- FFchnlnumber 1.3.6.1.4.1.11010.2.1.2
frequencyHopping OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Frequency Hopping 0: Disable 1: Enable"
::= { frequencyMode 3}
-- FrequencyHopping 1.3.6.1.4.1.11010.2.1.3
seedNumber OBJECT-TYPE
SYNTAX Integer32 (0..32)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Seed Number (0-32)"
::= { frequencyHopping 1}
-- SeedNumber 1.3.6.1.4.1.11010.2.1.3.1
smallLoopFrequenciesTable OBJECT-TYPE
SYNTAX SEQUENCE OF SmallLoopFrequenciesEntry
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Small Loop Frequencies table "
::= { frequencyHopping 2 }
-- smallLoopFrequenciesEntry 1.3.6.1.4.1.11010.2.1.3.2
smallLoopFrequenciesEntry OBJECT-TYPE
SYNTAX SmallLoopFrequenciesEntry
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Table Entry"
INDEX { seqno, indexloop }
::= { smallLoopFrequenciesTable 1 }
SmallLoopFrequenciesEntry ::= SEQUENCE {
seqno Integer32,
index Integer32
}
seqno OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Frequency Number."
::= { smallLoopFrequenciesEntry 1 }
indexloop OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Frequency Number."
::= { smallLoopFrequenciesEntry 2 }
orthogonalHopping OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Orthogonal Hopping "
::= { frequencyHopping 3}
-- OrthogonalHopping 1.3.6.1.4.1.11010.2.1.3.3
adaptiveHopping OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Adaptive Hopping 0: Disable 1: Enable"
::= { frequencyHopping 4}
-- AdaptiveHopping 1.3.6.1.4.1.11010.2.1.3.4
fullBand OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Full Band 0: Disable 1: Enable"
::= { frequencyHopping 5}
-- FullBand 1.3.6.1.4.1.11010.2.1.3.5
partialBandTable OBJECT-TYPE
SYNTAX SEQUENCE OF PartialBandEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Partialband table "
::= { frequencyHopping 6 }
partialBandEntry OBJECT-TYPE
SYNTAX PartialBandEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table Entry"
INDEX { bandstarting, bandending, indexpartial }
-- INDEX { bandending }
::= { partialBandTable 1 }
PartialBandEntry ::= SEQUENCE {
bandstarting Integer32,
bandending Integer32,
index Integer32
}
bandstarting OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Starting Frequency Number."
::= { partialBandEntry 1 }
bandending OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Ending Frequency Number."
::= { partialBandEntry 2 }
indexpartial OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Frequency Number."
::= { partialBandEntry 3 }
spotSelectionTable OBJECT-TYPE
SYNTAX SEQUENCE OF SpotSelectionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Small Loop Frequencies table "
::= { frequencyHopping 7 }
spotSelectionEntry OBJECT-TYPE
SYNTAX SpotSelectionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table Entry"
INDEX { sschnlnumber, indexss }
::= { spotSelectionTable 1 }
SpotSelectionEntry ::= SEQUENCE {
sschnlnumber Integer32,
index Integer32
}
sschnlnumber OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SSchnl Number."
::= { spotSelectionEntry 1 }
indexss OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Index."
::= { spotSelectionEntry 2 }
spotEliminationTable OBJECT-TYPE
SYNTAX SEQUENCE OF SpotEliminationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Spot elemination chnl numbers "
::= { frequencyHopping 8 }
spotEliminationEntry OBJECT-TYPE
SYNTAX SpotEliminationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table Entry"
INDEX { sechnlnumber, indexse }
::= { spotEliminationTable 1 }
SpotEliminationEntry ::= SEQUENCE {
sechnlnumber Integer32,
index Integer32
}
sechnlnumber OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SE chnl number"
::= { spotEliminationEntry 1 }
indexse OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Index."
::= { spotEliminationEntry 2 }
interleaver OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Interleaver 0: Disable 1: Enable"
::= { uurmiTcsAdministration 2}
-- Interleaver 1.3.6.1.4.1.11010.2.2
txPower OBJECT-TYPE
SYNTAX Integer32 (0..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" TxPower 0:Auto 1:High 2:Low 3:Manual"
::= { uurmiTcsAdministration 3}
-- TxPower 1.3.6.1.4.1.11010.2.3
txPowerManual OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" TxPowerManual"
::= { txPower 1}
-- TxPowerManual 1.3.6.1.4.1.11010.2.3.1
-- Variables under uurmiTcsDiagnostics
loopBack OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Loopback Mode"
::= { uurmiTcsDiagnostics 1}
-- LoopBack 1.3.6.1.4.1.11010.3.1
userLoopBack OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" User level Loopback Mode 0: Local 1: Remote"
::= { loopBack 1}
-- User 1.3.6.1.4.1.11010.3.1.1
iduLoopBack OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" IDU level Loopback Mode 0: Local 1: Remote"
::= { loopBack 2}
-- User 1.3.6.1.4.1.11010.3.1.2
oduLoopBack OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" ODU Level loopback mode 0: Local 1: Remote"
::= { loopBack 3}
-- User 1.3.6.1.4.1.11010.3.1.3
fecLoopBack OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" FEC level loopback Mode 0: Local 1: Remote"
::= { loopBack 4}
-- FECLoopBack 1.3.6.1.4.1.11010.3.1.4
baseBandLoopBack OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" BaseBand level loopback mode 0: Local 1: Remote"
::= { loopBack 5}
-- BaseBandLoopBack 1.3.6.1.4.1.11010.3.1.5
modemLoopBack OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Modem level loopback mode 0: Local 1: Remote"
::= { loopBack 6}
-- ModemLoopBack 1.3.6.1.4.1.11010.3.1.6
bite OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" BITE Information"
::= { uurmiTcsDiagnostics 2}
-- BITE 1.3.6.1.4.1.11010.3.2
rssi OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" RSSI Information"
::= { bite 1}
-- RSSI 1.3.6.1.4.1.11010.3.2.1
snr OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" SNR Information"
::= { bite 2}
-- SNR 1.3.6.1.4.1.11010.3.2.2
txPWR OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" SNR Information"
::= { bite 3}
-- TX_PWR 1.3.6.1.4.1.11010.3.2.3
sysVoltages OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" System Voltages"
::= { bite 4}
-- SysVoltages 1.3.6.1.4.1.11010.3.2.4
idu12v OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" IDU 12v"
::= { sysVoltages 1}
-- idu12v 1.3.6.1.4.1.11010.3.2.4.1
idu5v OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" IDU 5v"
::= { sysVoltages 2}
-- idu5v 1.3.6.1.4.1.11010.3.2.4.2
odu12v OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" IDU 12v"
::= { sysVoltages 3}
-- idu12v 1.3.6.1.4.1.11010.3.2.4.3
odu5v OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" IDU 5v"
::= { sysVoltages 4}
-- idu12v 1.3.6.1.4.1.11010.3.2.4.4
oduneg5v OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" IDU neg5v"
::= { sysVoltages 5}
-- idu12v 1.3.6.1.4.1.11010.3.2.4.5
--- uurmiSourceInformation
latitude OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Latitude info."
::= { uurmiSourceInformation 1}
longitude OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Longitude info."
::= { uurmiSourceInformation 2}
tx-low-power NOTIFICATION-TYPE
-- SYNTAX DisplayString (SIZE (0..255))
-- MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Transmit power low notification "
::= { uurmiNotifs 1 }
low-rssi NOTIFICATION-TYPE
-- SYNTAX DisplayString (SIZE (0..255))
-- MAX-ACCESS read-write
STATUS current
DESCRIPTION
"RSSI low notification "
::= { uurmiNotifs 2 }
sync-fail NOTIFICATION-TYPE
-- SYNTAX DisplayString (SIZE (0..255))
-- MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Synchrinization failure low notification "
::= { uurmiNotifs 3}
tx-synth-fail NOTIFICATION-TYPE
--SYNTAX DisplayString (SIZE (0..255))
-- MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Transmit Synth failure notification "
::= { uurmiNotifs 4 }
rx-synth-fail NOTIFICATION-TYPE
-- SYNTAX DisplayString (SIZE (0..255))
-- MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Rx Synth failure notification "
::= { uurmiNotifs 5 }
voltages-obnormal NOTIFICATION-TYPE
-- SYNTAX DisplayString (SIZE (0..255))
-- MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Abnormal voltages "
::= { uurmiNotifs 6 }
tx-normal-power NOTIFICATION-TYPE
-- SYNTAX DisplayString (SIZE (0..255))
-- MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Transmit power normal notification "
::= { uurmiNotifs 7 }
normal-rssi NOTIFICATION-TYPE
-- SYNTAX DisplayString (SIZE (0..255))
-- MAX-ACCESS read-write
STATUS current
DESCRIPTION
"RSSI normal notification "
::= { uurmiNotifs 8 }
sync-succ NOTIFICATION-TYPE
-- SYNTAX DisplayString (SIZE (0..255))
-- MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Synchrinization succeded notification "
::= { uurmiNotifs 9}
tx-synth-succ NOTIFICATION-TYPE
-- SYNTAX DisplayString (SIZE (0..255))
-- MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Transmit Synth succeded notification "
::= { uurmiNotifs 10 }
rx-synth-succ NOTIFICATION-TYPE
-- SYNTAX DisplayString (SIZE (0..255))
-- MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Rx Synth succeded notification "
::= { uurmiNotifs 11 }
voltages-normal NOTIFICATION-TYPE
-- SYNTAX DisplayString (SIZE (0..255))
-- MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Normal voltages "
::= { uurmiNotifs 12 }
END
URL for further info: info at uurmi.com
See also the
OID Repository website reference for 1.3.6.1.4.1.11010
Superior references
Tell me about OIDs you know about
Incoming OIDs that have not been proofread yet
rpk0507@gmail.com
Entered: Mon Jul 9 11:22:29 CEST 2012
(not changed manually)